Don't paint your house yourself unless you have the time, tools, skills, and stamina to do the job. Depending on the size and height of your home and the condition of the existing siding, preparing and painting a house on your own can be a tedious and difficult job. For the cost of a few boxes of exterior paint, in addition to some patches and sandpaper, you can have a completely new house. You create more work for yourself when you decide to change the exterior color of your house.
It significantly increases the amount of work when the new layer is lighter than the existing layer. Even with single-coat paint, the old color often still shows up in some areas. However, when you paint the same color, those areas blend together. Buy colored putty to match the color of your paint if you plan to apply just one coat of paint, but white putty should be fine if you plan to apply two coats of paint and is generally cheaper per tube than color putty.
If your house has a flat roof or even large flat sections, use a paint roller and extension pole to cover those sections quickly. If most of the paint still adheres well and doesn't have too many potholes, the boundary between the paint and the bare wood can be smoothed with 50 or 80 grit sandpaper. These are tricks, tips and recommendations that will help you paint your house efficiently, effectively and with less effort. If the house has not been painted for many years or if there will be a big change in color, it is necessary to prime the entire house.
Once you've chosen the color of the paint, you'll need to measure how many square feet of surface you're going to paint. A new paint job has the power to completely transform the look of your home in less time and for less money than any other remodeling project. Now that you understand the basics of how to paint the exterior of a house, you can decide if it's a project for you. Deciding which paint to use has become much easier now that acrylic lattices have brought oil-based paints to near extinction.
Place hanging cloths along the floor and then remove broken paint and release with a scraper or a medium-grained sanding block. You should be able to get a budget to paint the entire house and just to paint the second floor, in order to budget for this. The first step in a quality exterior paint job, or any painting project, is to start with a clean surface. Therefore, the first step in painting outside the home is to remove these things from existing paint.
If the house or surface you are painting was built before 1978, see the EPA renovation, repair and painting program for guidelines. Once you have allowed the paint surface to dry, you can start preparing the work surface to receive the paint. When the coating (or bank accounts) can't withstand the impact of total bare work, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-bonded paint under Peel Bond, a thick primer.
Leave Reply