Water damage is a common problem that can lead to serious problems at industrial facilities. While this problem is often the result of a combination of factors, it can be prevented with a proper water damage prevention strategy.
First, an industrial leader needs to assess the risks and develop a water damage prevention plan that outlines strategies for maintenance and monitoring, emergency protocols, insurance considerations and training employees. This plan should be reviewed annually to ensure that it meets the needs of a facility.
2. Conduct regular inspections of plumbing fixtures, pipes, and seals for leaks or signs of discoloration; check pumps, water lines and sprinklers for abrasions, cracks or other issues.
3. Repair any small leaks promptly to prevent significant damage to the facility’s interior or exterior.
4. Clean out gutters regularly to prevent debris from clogging the downspouts and damaging siding, decking, and landscaping. Hiring a professional gutter cleaning. Hiring a professional gutter cleaning service like Gutter Cleaning Spokane
will give you safety and convenience.
5. Install diverters at the bottom of downspouts to direct water away from your house and foundation.
6. Use a soft washer to remove dirt, grime, and mold from the outside of your gutters.
7. Clean out the downspouts and gutters before a storm to avoid clogs from leaves, twigs or other debris that can cause water to run off the roof and onto the ground.
8. Keep your roof shingles free from dust, mold and mildew.
A roof that is constantly shedding dust, mold and mildew is susceptible to water damage. The moisture can weaken the shingles, which can eventually cause them to collapse and leak.
Keeping your roof shingles free of dirt and mildew will help you avoid having to replace them.
Cleaning your gutters on an annual basis will ensure that any rainwater that hits the top of your roof flows into your downspouts and away from your home.
This routine upkeep can save you money from repairing damaged roofing, siding and landscaping as well as from replacing rotten wood that has become a breeding ground for rodents and insects.
9. Make sure to drain the water out of the faucets and appliances before leaving on vacation.
Lastly, make sure to shut off the main incoming water valve at the main water tap. This will prevent water from flooding your home while you are away.
A leaking hot water heater, a burst pipe or a flooded basement are all very common causes of water damage in homes. If the damage is large or extensive, you should hire a professional water restoration company to help clean up and repair your home.
In addition to these steps, a homeowner can also perform some simple, easy checks and repairs themselves.
1. Use a water-resistant material for piping, fixtures and other exposed parts of your building.
2. Use water-resistant paint on the inside of your buildings’ doors and windows to prevent the growth of mold, mildew and other fungi.
3. Make sure that the roof and exterior of your building are covered with a protective coating, such as a rust-proofing system or an asphalt shingle membrane.